Download Mode 1 Mode 2 ? Honda Accord 2003-2004 ? Honda Accord 1998-2002 ? Honda CRV 2002-2004 ? Honda CRV 1998-2001 ? Honda Civic 2001-2004 ? Honda Odyssey 1998-2003 ? Honda Element 2003-2004 ? Honda Pilot 2003 ? Acura RSX 2002-2004 ? Acura CL 1998-2003 ? Acura TSX 2004 ? Acura Integra 2000-2002 ? Acura TL 2004 ? Acura MDX 2001-2002 ? Acura MDX 2003 ? Acura TL 1998-2002 ? Acura 1.7EL 2001-2004 ? Acura 1.6EL 1998-2000. 1. Remove steering column shroud to gain access to the wire harnesses at the rear of the ignition switch. 2. Locate the appropriate wires exiting the ignition switch and immobilizer receiver. The wire colors are listed in the Wire Color Guide. 3. Wire the 556H as shown in the wiring diagram. GROUND BLACK (+) 12V BATTERYRED IGNITION IN PINK IGNITION OUT PINK/BLACK DATA YELLOW/BLACK DATA YELLOW N.C. ORANGE DATA 2 IN ORANGE/BLACK (-)GROUND IN BLUE/WHITE REFERENCE GREEN ? BLACK: BLACK: Connect this wire to a quality chassis ground (preferably scraped sheet metal) separate from other component ground locations. Wire Connection Guide Wire Connection Guide Wire Color Guide Wire Color Guide Installation Instructions RED: Connect this wire to a constant (+)12 volt source. ? PINK: PINK: Connect this wire to the Ignition output from the ECM. ? PINK/BLACK: PINK/BLACK: Connect this wire to the Ignition input from the ignition switch. ? YELLOW/BLACK: YELLOW/BLACK: For mode 1 Connect this wire to data wire that connects from the ECM to the Ignition switch, for mode 2 connect this wire to the Data wire from the Ignition switch. ? YELLOW: YELLOW: Connect this wire to the same data wire listed above for mode 1, for mode 2 connect this wire to the Data wire from the ECM. ? ORANGE: ORANGE: Not Connected ? ORANGE/BLACK: ORANGE/BLACK: Not Connected for mode 1, for mode 2 this wire is connected to the Data 2 wire that connects the Ignition switch and the ECM. ? BLUE/WHITE: BLUE/WHITE: Connect this wire to the remote starter. ? GREEN: GREEN: Connect this wire to pin 1 at the ignition switch.
The post 556H Honda / Acura Immobilizer Bypass Module Installation Instruction appeared first on ToManual.com.
